EPAX 8.9" 4K Mono LCD Screen with cable, for X10 and E10 mono printers

Brand: Epax
Maximum quantity available reached.


Estimated Arrival: Between Oct 02 and Oct 04. *ETA to USA Only

Shipping & Returns: Free Fast Shipping to Contiguous U.S. for All Orders Over $199!

  • This is the monochrome LCD screen for the EPAX X10 and E10 3D printers which are using 8.9" 4K mono screen.  

    We are currently only offering the E10's mono screen as it is compatible with the X10 printer. Both E10 and X10 use the same mainboard and the same screen interfaces so the E10's 4K mono screen can be used with the X10 with just a quick firmware update.

    LCD Screen Specifications

    • Size: 8.9" diagonal
    • Resolution: 3840 x 2400
    • Pixel precision: about 50um 


    • 1x 8.9" 4k monochrome LCD screen
    • screen cable
    • 1x precut tape (to be applied around the screen after installation)


    - Monochrome LCD screens last much longer than color screens (with proper use your screen should last several thousand hours). This screen has tempered glass installed on top. So even if you spill resin on top of it you can gently shovel it off without damaging the screen. 

    - 4k screen resolution at 8.9" size

    - Very short layer exposure times are needed (up to 1/4th of the time needed for color LCD screens)

     Do not leak resin under the screen through edges.  Cover edges with 0.1mm thick kapton tape or reinforced electric tape or precut tape.   A lot of failed screens are due to tiny residues in the resin vat between prints. The residues get pushed into the screen by the build platform, leading to heated stress spots and sometimes even cracks in the screen. Some failures are also due to unnecessary over exposure time settings. Because screens are considered consumables they are not covered by a warranty. We do guarantee that your screen will work at arrival. 

    ALWAYS make sure your vat is free from any debris and that the build plate has nothing on it before starting a new print job.  Monochrome screens are more expensive due to being produced in smaller volumes only for 3D printing.

    Using this screen with other similar 3D printers is NOT supported.

    Replacing your screen always involved re-leveling your build plate.

    You can reference guide for screen replacement too

    We work very hard to ensure that we offer the absolute best prices online.  If you find another online store that offers a lower price than us within six months of your purchase date please let us know and we will refund your original payment for the difference.  We want you to feel confident that you are getting the absolute best price for the product you are ordering.  If you find that our own website has a lower price for the same item you have ordered within six months of your purchase date we will refund the difference as well.

    To request your partial refund simply e-mail us a link to the same product on our website, or on our competitors website within six months from the date of your order and we will process the credit accordingly.

    Our 100% Price Guarantee has some limitations:

    • You must purchase the item from our website before requesting your Price Match Guarantee
    • Promotions such as rebates and buy one, get one free offers are not eligible
    • The item must be in stock on the competitors website
    • The competitor must be an online store, they may not have a retail location
    • The website can not be a discounter or auction website (ie; eBay, overstock, etc..)
    • The competitor must be an Authorized Retailer of the product in question
    • The Price Match Guarantee includes the item price and the shipping charges, it excludes sales tax

    Order Confirmation

    As soon as you place your order, you will receive an order confirmation e-mail.  This means that we have received your order in our system and pre-authorized your credit card for the purchase.  As soon as we receive your order, we automatically reach out to our suppliers to confirm that it is in stock and available for immediate shipment.  If your item is on backorder or unavailable, we will void the pre-authorization and reach out to you via e-mail.  If your item(s) are available for immediate shipment (within 5 business days), we will process the charges and submit the order for shipment.

    Order Shipment

    If your order is in stock and we process the charges to your credit card, it will ship within five business days from the date of your order.  We will send you tracking information within 24 hours of your order leaving the warehouse to the e-mail address you provided when checking out.  If you do not receive tracking information from us within six business days of your order, feel free to follow up with us at info@the3dlabworkshop.com


    Please inspect the packaging of your item(s) when they arrive, if you notice any damage you should make note of it when signing for delivery.  If your item(s) do arrived damaged, please send photos to info@the3dlabworkshop.com and we will process an insurance claim on your behalf.

    Cancellations & Refunds

    The 3D Lab Workshop enforces a strict "No Returns Accepted" policy for opened and/or partially used products, including filament, resin, or any consumable of any size and weight that has been used or opened from its factory and vacuum seal.  Only products and consumables that are unused, and in brand new factory condition are eligible for return to the manufacturer of origin within 14 days of the purchase date.

    If a product is found to be non-functional or defective, the product must be returned with its full original contents within 14 days of purchase for inspection of the non-functionality.  If the product is found to be defective or non-functional a full-refund will be given, not including return shipping at the customer's expense.

    All orders cancelled after 48 hours are subject to a $20 administration fee, whether or not your order has shipped.  If you order has shipped, you (the buyer) will also be responsible for actual return shipping charges. Refunds will only be issued to the original credit card that you use when placing your order.  Buyer is responsible for and pays a 20% restocking of the value of the returned item(s).  Buyer pays all shipping fees for the returned item(s). 


    To complete your return, we require a receipt or proof of purchase. You must contact The 3D Lab Workshop for a Return Authorization number (RA#) by emailing us at returns@the3dlabworkshop.com. Returns received without an RA# will be refused.

    Please do not send your purchase back to the manufacturer.


    All products of the following brands are not subject to exchanges and returns: CreatBot, Ecubmaker, Raise3D, Uniz.

    Unauthorized return:

    Any return made by Customer without a written return authorization from seller/vendor will be considered an unauthorized return (“Unauthorized Return”). Unauthorized Returns will not be subject to a refund or credit by The 3D Lab Workshop.


    Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.
    If you are approved, then your refund will be processed within 14 days after approval of refund, and a credit will automatically be applied to your credit card or original method of payment, within a certain amount of days.

    Late or missing refunds:

    If you haven’t received a refund yet, first check your bank account again.
    Then contact your credit card company, it may take some time before your refund is officially posted.
    Next, contact your bank. There is often some processing time before a refund is posted.
    If you’ve done all of this and you still have not received your refund yet, please contact us at returns@the3dlabworkshop.com.

    Sale items:

    Only regular priced items may be returned, unfortunately, sale items cannot be returned. 


    We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at returns@the3dlabworkshop.com and please do not send your purchase back to the manufacturer.

    Shipping Directions:

    For returns and exchanges, please contact us at returns@the3dlabworkshop.com for the exact shipping address pertaining to your purchase. 

    You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.

    Depending on where you live, the time it may take for your exchanged product to reach you may vary.

    When you are shipping an item you purchased, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.


    Each Manufacturer of each brand of 3D printers that we sell in our store has a dedicated support team for The 3D Lab Workshop customers, so you can be sure that trained and certified technicians will support you, so you can always contact us or the Manufacturer directly with any questions and we will help you.

    By purchasing a Product in our store you get a standard warranty for your Product provided by the Manufacturer. All warranties and warranty service are provided directly by the Manufacturer of your Product, our store does not provide any separate or additional warranty, nor does our store provide warranty service.

    In addition to the limitations set forth above, no warranty shall apply to any Product that has been: (i) modified, altered or adapted; (ii) maltreated or used in a manner other than in accordance with its intended purpose; (iii) repaired by a third party; (iv) improperly installed by any party other than The 3D Lab Workshop (v) relocated, to the extent that the problems with the Product are attributable, in The 3D Lab Workshop professional opinion, to such relocation; (vi) used directly or indirectly in supporting activities prohibited by the United States; (vii) purchased from any entity other than The 3D Lab Workshop; (viii) affected by normal wear and tear; (ix) damaged by accident, abuse, misuse, flood, fire, earthquake or other external causes; (x) cosmetic damage including, but not limited to, scratches, dents and broken plastic, as applicable; and/or (xi) damaged as a result of shipping, exposure to tobacco smoke/weather, terrorism, acts of God or failure to follow the Manufacturer's instructions. The 3D Lab Workshop shall not be responsible for any warranties other than those provided by the manufacturer or herein.

    In no event shall The 3D Lab Workshop be liable or responsible for the expense of removal or installation of defective Product, incidental, consequential or liquidated damages, or for any other direct or indirect damage, loss, cost, expense or fee.

    No warranty covers any third-party products or hardware installed into, or attached to, the Product after the date of purchase. Furthermore, if an installation fails or is damaged in a manner that causes damage to the Product, no warranty shall cover such damage. Repair and/or replacement of any damaged components in these situations shall be subject to additional repair and/or replacement charges.

    Customer Reviews

    No reviews yet

    Related products  

    Customer Reviews

    No reviews yet